Thermo-graphic Embossing Powders
Stamp an image or text on to the substrate and sprinkle the selected type of powder on to the wet ink
Lift the substrate (card, wood, leather etc), invert and lightly tap over a catcher sheet to remove excess powder
The powder will stick to the wet ink. Remove any stray powder particles with a small art brush and return
the unused powder to it's container (usually only a very small amount is used per image).
Apply heat to the image (hot air blower, hotplate, grill etc) and watch the magical transformation.
The powder will congeal into a raised 3D copy of your image before your very eyes.
Refill PacksPowders and Crystals are now only supplied in plastic refill packs, which means that you are not required to pay for unwanted packaging. This represents an across the range saving from 10% to 17% on previous pot prices.
Clear Gloss £1.00 - 20ml Pack
A transparent powder that gives lift and lustre to the natural underlying ink colour. Clear powders are often overlooked and the enhancement that they bring to plain ink impressions not realised. A good economical starting point for the novice crafter testing the embossing scene. Add a little sparkle by mixing Glitter Crystals
Metallics £1.55 - 20ml Pack
Give your image or text or invitation that sophisticated embossed Gold/Silver/Copper metallic finish Bring your Wedding Invitation to life. Use the BLACK embossing ink as a base for the most authentic results with metallic powders
Metallic Sparkles £1.75 - 20ml Pack
Make that metallic finish shimmer and sparkle
Pearlescents £1.55 - 20ml Pack
Similar to the standard metallic finish, but with an ethereal translucency that allows the underlying print to radiate at certain angles. These powders react to an underlying ink colour providing a range of pearlised colour effects, which vary according to the selected ink, or powder colour combination.
Glitter Crystals £1.75 - 20ml PackRoyal Blue - Silver - Emerald Green Light Gold - Crystal White - Fire Red
Mix with the above powders to make create your own sparkle effects. Add a crystal content of up to 20% to any of the powders. Try a lower content to start with and test with various degrees of heat applied to create a range of sparkle finishes - OR - use them with glue pens, or similar adhesives for direct application. Have fun!GLITTER REFILL PACKS £1 . 75
|